IMS International Market Square – Event Gobo, Uplighting and Video Projection Rental

We recently did an event at IMS the International Market Square. We did a monogram gobo of the couples initials on the dance floor. We also did some uplighting and video projection. The video was on a 9’x12′ screen rear projected and the image held up very well even in the day late.

Barco DCS 200 Dual Channel Scaler Switcher for rent in Minneapolis Minnesota short long term rental

The DCS-200 is a dual-channel switcher designed to provide true seamless switching between different input sources and formats, while maintaining superb scaling quality at an affordable price. It has been designed for straightforward and simple operations, which makes it the ideal seamless switcher for live events, boardrooms, hotel ballrooms, houses of worship, lecture halls, training facilities and more.

Processing

  • True seamless switching
  • High quality scaling technology
  • 10-bit sampling and internal processing/scaling
  • Auto-acquire and auto-positioning
  • Up to three (3) LOGO stores/recall capability
  • Luma keying/utilizing DVI
  • Low video delay

Inputs

  • All resolutions from NTSC/PAL up to UXGA. Including all HD resolutions
  • DVI, analog computer and video, HD/SD SDI

Outputs

  • All progressive resolutions from 480p up to UXGA, including all HD progressive resolutions
  • Full screen
  • Supports HDCP compatible projectors
  • Built-in test pattern simplifies projector alignment

Preview output

  • Progressive resolutions from 480p up to UXGA, including all HD progressive resolutions
  • DVI and HD-15 connectors available (both active)

Mechanical

  • Auto ranging power supply
  • Width: 19” rack
  • Height: 2RU
  • Operating temperature range: 0° to 40°C (32° to 104°F)
Front panel control
Display section
  • Four (4) line, 128×32 VFD Display
  • Menu navigation via rotary encoder knob, Select/Escape buttons
Inputs section Ten buttons select the corresponding input source, or the stored LOGO image, to be placed on program after the TAKE button is pressed. There are three button states:

  • Off: The source is not currently on program
  • Blinking: The source has been selected and will be placed on program after the TAKE button is pressed
  • Yellow: The source is on program.
Effects section
  • FRZ: Instantly freezes the current image that is on program.
  • BLK: Cuts the program to black
  • KEY: The key source will transition to/from program, after the TAKE button is pressed
  • TAKE: Transitions the selected source or KEY at the pre-selected rate.
Inputs
Six analog inputs via HD-15 VGA connectors
  • Supports YPbPr, RGBHV, S-video and composite
  • 10-bits/color sampling at maximum 170 MHz
  • True pixel mapping (1:1) for signal resolutions up to 1600×1200@60 Hz. Sources with higher pixel rates (1920x1080p@60, 1920×1200@60 and 2048x1080p@60) are also supported.
Two digital or analog inputs via DVI-I connectors
  • 8-bit digital input per DDWG 1.0 with HDCP support.
  • RGBHV data via analog pins of the DVI-I connector
  • The digital source will be processed if valid DVI signals are detected. The Analog source can be selected via the front panel menu.
Serial digital input (HD/SD SDI) via BNC connector
  • SD SDI per SMPTE 259M-C (NTSC/PAL resolution)
  • HD SDI per SMPTE 292M (HDTV)
Outputs
Program output
  • Provided in digital format on the DVI-I program connector and in analog format on the HD-15 Program connector.
  • Progressive resolutions at RGBHV
  • HDCP encryption support for DVI signals
Preview output
  • Provided in digital format on the DVI-I preview connector and in analog format on the HD-15 preview connector
  • Progressive resolutions from 480p up to UXGA, including all HD progressive resolutions